Nettverks kamera med pan/tilt funksjon.

Her får du webserver med kamera som kan remote kan ses internett eller intranett. Du kan også styre pan og tilt via internett "opp/ned eller 360grader". Det eneste man trenger er ett nettverks punkt. Ingen pc ellernoe trengs. Har også støtte for ppp0. Har muligheten for å syre opptil 2 kamera av typen usb. Alt forgår via IE. System har innbygget bevegelses sensor og muligheten for å sende email hvis det skjer en endring. Du kan overvåke fra hvor som helst i verden. Så lenge du har internett tilgang.

System krav

System Requirements:
1.CPU Pentium III 450 MHz and above
2.Memory 64 MB and above
3.VGA card resolution at least 800*600
4.CD ROM Drive
5.Java enable and compliant Web browser (IE5.0 and above)
Major parameters Specification
Built-in Pin Hole lens 4.3mm image device 1/4 Sony Super Had color CCD
horizontal resolution : 420TV lines
TV system: PAL/NTSC
Minimum illumination: 0.5Lux

Feature/specs

1.plug in the USB Camera Locate the USB port and plug the connecter into one of the iCAMView USB port
2. Connect the Ethernet Cable to Hub/IP Share connect one end of the Ethernet cable to either a Hub or an IP share.
3.Connect the Ethernet Cable to iCAMView Locate the Ethernet cable port on iCAMView and plug in the cable. Once power is turned on, the LED will flash indicating connection is made and data is being transferred.
4.Connect power
Connect the adaptor socket to the wall outlet. Locate the power port, and insert the plug. The green LED will light up indicating power is on
5.Check the LCD
The LCD will show the IP Address, Subnet mask and Gateway in rotation. Please remember the IP Address you will need it later
This icon on the LCD indicates the number of USB camera that is currently connected and functioning
Install iCAMView Utility(IP Locator)
1.Insert the utility CD into the CD-ROM drive. Click 'iCAMView Utility' to begin installation
2.Once installation is completed, click the 'iCAMVew Utility' icon to start the program
3.Click 'Setup Wizard' and go through the step-by-step installation
View the Video Stream
1. Open Internet Explorer and enter the IP address, which is displayed on the LCD or iCAMView Utility.
2.Enter your Administrator User Name and Password set in "Setup Wizard."Otherwise, just cluck 'OK' to login.
3.Click on 'ActiveX'or 'Sun Java' on Camera A to view the video.
4. Click on the arrows to control the camera direction

Item Includes

A standard package should contain the following items.
1.IP camera
2.power adapter
3.Server
4.Ethemet cable.